HAMPTON BAY 240-177 Instruction Manual page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2ea Screws (#3) 1ea Top Cover (#5)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Screw either Finial A (#9) or Finial B (#10) onto the Nipple (#8).
3. Install a 100 watt medium base incandescent light Bulb (#4) (not included)
or an equivalent standard base compact fluorescent light bulb (not included)
in the Socket (#7) in the Fixture Frame (#6).
4. Place the Top Cover (#5) onto the top of the Fixture Frame (#6). Align the
holes on the Top Cover (#5) with the holes on the Fixture Frame (#6). Screw
the Screws (#3) into the holes to secure the Top Cover (#5) to the Fixture
Frame (#6).
Page 4
1ea Finial A (#9) 1ea Finial B (#10)
ASSEMBLAGE:
Page 21