Troubleshooting - Levita ES 140 Operating Instructions Manual

LEVITA

Electric chain saw store in a dry place away from heat sources and out of reach of children. Avoid
storage outdoors or in damp areas.
TROUBLESHOOTING
Problem
The machine does not start up
Poor cutting performance
Sparks fly at the motor
Bar and chain running hot and
smoking
Oil does not flow
Chain saw motor is warming up
Chain jumps off guide bar
If it fails to remedy the defect, pass a chain saw manufacturer's authorized service center for repair.
Possible cause
Mains socket is without current
Power cable damaged
Safety brake lever is in ON
position
Blunt chain
Chain saw fitted incorectly
Motor or carbon brushes
damaged.
Chain overtighten
Oil tank is empty
Poor lubrication
Oil tank is empty
Poor lubrication
Blunt chain
Poor lubrication
Excessive pressure to cut
Clogged air vents of the motor
Inappropriate extension cord
Loose chain tension
Remedy
Check whether the current socket
is live.
Check whether the power cable is
undamaged.
Check position of safety brake
lever. Chain only runs if safety
brake lever is released.
Sharp or replace the chain
Check, if the saw is correctly
fitted
Take the chain saw to a
specialised workshop or the
works after‐sales service.
Check the chain tensioning.
Check the oil level.
Clean the openings in the bar.
Check the oil level.
Clean the openings in the bar.
Sharp or replace the chain.
Clean the openings in the bar.
Let the saw, so she went to cut
Clean air vents of the motor
Change the extension cord
Check the chain tensioning.
EN‐13