Introduction - RD Instruments WorkHorse Sentinel User Manual

WorkHorse Sentinel User's Guide
1

Introduction

Thank you for purchasing the RD Instruments (RDI) WorkHorse. This
guide is designed to help first time WorkHorse users to set up, test, and de-
ploy their ADCP.
This guide is designed for use with the other WorkHorse Technical Manual
books. Where needed, there are references to detailed information and fig-
ures contained in the WorkHorse Technical Manual.
WorkHorse Sentinel deployments are most often Self-Contained but can be
Real-Time. Typically, deployments are considered to be Self-Contained
when the ADCP is remotely deployed and powered using internal batteries.
In this configuration, no external connections to the ADCP are made during
the deployment. However, the ADCP can be connected to external power.
This power can be provide either by an external battery case or from shore.
This type of deployment is still considered Self-Contained, but this quick
reference guide may not consider all of the possibilities of this application.
Real-Time use refers to the fact you are viewing the data as the ADCP col-
lects it via a personal computer. This data is also stored on the computer to
allow for data playback and processing at a later time.
NOTE. When you receive your WorkHorse, look for a set up card that
shows all of the pieces you should have in your box. If anything is missing
or damaged, contact RDI immediately.
P/N 957-6163-00 (January 2001)
WorkHorse Sentinel User's Guide
Acoustic Doppler Solutions
page 1