11.3.3 Verify The Compass; Figure 14. Deployment Wizard - Compass Verification - RD Instruments WorkHorse Sentinel User Manual

WorkHorse Sentinel User's Guide

11.3.3 Verify the Compass

The third step in the Deployment Wizard will verify the compass using the
AX-command. For more information on the compass verification, see
"Compass Calibration Verification," page
check the Skip box or click Next to begin verifying the compass.
Figure 14.
page 30
Deployment Wizard – Compass Verification
20. If you want to skip this step,
RD Instruments