11.3.4 Run The Pre-Deployment Tests; Figure 15. Deployment Wizard - Test The Adcp - RD Instruments WorkHorse Sentinel User Manual

11.3.4 Run the Pre-Deployment Tests

The fourth step in the Deployment Wizard will run the pre-deployment tests
Deploy?, System?, TS?, PS0, PA, PC2, RS, and PC1-commands. For more
information on how to test your ADCP, see
page 18. If you want to skip this step, check the Skip box or click Next to
begin the pre-deployment tests.
Figure 15.
P/N 957-6163-00 (January 2001)
Deployment Wizard – Test the ADCP
WorkHorse Sentinel User's Guide
"Testing Your WorkHorse,"
page 31