11.3.2 Set The Adcp's Clock; Figure 13. Deployment Wizard - Setting The Clock - RD Instruments WorkHorse Sentinel User Manual

11.3.2 Set the ADCP's Clock

The second step in the Deployment Wizard will set the ADCP's clock to the
computer's time and date using the TS-command. For more information on
the TS-command, see the
want to skip this step, check the Skip box or click Next to begin setting the
clock.
NOTE. WorkHorse time is set from your computer's time. Be sure your
computer is set to the time appropriate for your deployments before you
use WinSC to start data collection.
Figure 13.
P/N 957-6163-00 (January 2001)
Command and Output Data Format
Deployment Wizard – Setting the Clock
WorkHorse Sentinel User's Guide
Guide. If you
page 29