System Requirements; Software Installation; Utility Software - RD Instruments WorkHorse Sentinel User Manual

6.1

System Requirements

The WorkHorse software requires the following:
6.2

Software Installation

To install the WorkHorse software, do the following.
a. Insert the compact disc into your CD-ROM drive and then follow the
browser instructions on your screen. If the browser does not appear,
complete Steps "b" through "d."
b. Click the Start button, and then click Run.
c. Type <drive>:launch. For example, if your CD-ROM drive is drive D,
type d:launch.
d. Follow the browser instructions on your screen
6.3

Utility Software

The following DOS programs (on the RDI Tools CD) have been provided to
supplement features not yet implemented into the Windows environment.
RDI will incorporate these features in future releases. These programs have
been installed to the directory C:\Program Files\Rd Instruments\Utilities.
P/N 957-6163-00 (January 2001)
• Windows 95®, Windows 98®, or Windows® NT 4.0 with
Service Pack 4 installed
• Pentium class PC 233 MHz (350 MHz or higher recom-
mended)
• 32 megabytes of RAM (64 MB RAM recommended)
• 6 MB Free Disk Space (20 MB recommended)
• One Serial Port (two High Speed UART Serial Ports recom-
mended)
• Minimum display resolution of 800 x 600, 256 color (1024 x
768 recommended)
WorkHorse Sentinel User's Guide
page 13