Using The Crown; Shifting The Hands - Casio 5678 Operation Manual

Alarm Mode
●
The watch will beep when an alarm time is
reached.
Alarm
l
① ②
Select alarm/
On/off hourly time signal
③
Select alarm/
hourly time signal
Alarm number
A
Alarm or hourly time signal status (on/off)
B
Alarm hour/minute
C
World Time Mode
●
You can view the current time in 29 cities and
UTC (Coordinated Universal Time) time.
World Time
l
①
Show current city
③
City Codes (World Time Codes)
A
World Time City current time
B
Home City time
C
Receive Mode
●
With this mode, you can receive a time signal
manually.
Time Adjustment Using a Time Signal
l
Receive level indicator
A
Watch Operation Guide 5678

Using the Crown

The watch's crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
②
Important!
To prevent loss of water resistance
●
and/or damage due to impact, be sure
to screw the crown in by rotating it
away from you as you push it in.
When pushing the crown back in, take
●
care not to apply too much force.
②
Fast Forward/Fast Reverse
●
Normal timekeeping
After pulling out the crown to the first or second
click, rotating it quickly in succession in either
direction will start a fast forward or fast reverse
operation. While a fast forward operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
Stopping Fast Forward/Fast Reverse
●
Rotate the crown in the direction opposite that
①
of the ongoing operation or press any button.
Note
If you do not perform any operation for
●
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
Crown
Loosen
Screw in
Crown
Second click
First click

Shifting the Hands

Hand shift moves the hands out of the way for
easy viewing of display information.
1.
While holding down (L), press (B).
This will shift the analog hands to allow
easy viewing of display information.
2.
To return the hands to their normal
timekeeping positions, press (A), (B), (C),
or (D).
Note
If you leave the watch with its hands
●
shifted and do not perform any
operation for about ten seconds, the
hands resume normal timekeeping
automatically.
8