Using The Quick Config Wizard - Cisco MDS 9148 Quick Start Manual

Send documentation comments to mdsfeedback-doc@cisco.com
9

Using the Quick Config Wizard

To enable ports and assign zone memberships, follow these steps:
Click the Device Manager icon on your desktop to log in.
Step 1
Enter a password in the Password field (see
Step 2
Step 3 Click Open (see Figure
Figure 10 Device Manager Login
Step 4 Click FC, and then choose Quick Config.
Enable two ports by checking the two corresponding check boxes in the Enable column, as shown in
Step 5
Figure 11 Enable Zone Ports
Select one of the two enabled ports that you want in a zone by checking its check box in the Ports Zoned To area.
Step 6
When you check this check box, the second enabled port automatically becomes checked. Both ports are now members
of the same zone.
Click Next.
Step 7
You see a summary of your changes, as shown in
Figure
10).
10).
Figure 12.
Figure 11.
9