Cisco MDS 9148 Quick Start Manual page 5

Send documentation comments to mdsfeedback-doc@cisco.com
Figure 5 Switch Ground
Connect the power cable to the AC power receptacle, and then plug it in (see
Step 2
The Cisco MDS 9148 Switch supports only AC power supply. The power supply status is indicated on a front panel
LED.
The Cisco MDS 9148 Switch includes a front panel reset button that resets the switch without cycling the power.
Power up the switch (see
Step 3
System grounding pad
Figure 6).
Grounding
pad location
Wire
Screws (M4)
Grounding
lug
Figure 6).
5