Dacor DTI36P876BB User Manual page 25

Size of pans
Induction cooking zones adapt automatically to the size of the bottom of the
cookware up to a certain limit. However the magnetic part of the bottom of the
cookware must have a minimum diameter depending upon the size of the cooking
zone.
Cooking zones Minimum diameter of the bottom of the cookware
Front or Rear Flex zone plus
Flex zone plus 9.4 inch (240 mm) (long side dimension), oval, fish
DTI30P876BB,DTI36P876BB_DG68-01296A-00_EN+MES+CFR.indb 25
NOTE
To turn the synched elements off, touch the
ON/OFF key for any synched element.
The two synced elements will turn off
simultaneously.
5.5 inch (140 mm)
kettle
Flex zone Plus
The Flex zone is the large cooking area
located on the left side of the hob (see the
Cooking Zone 1
figure below) that is specially designed to
accommodate multiple pots and pans of
varying shapes and sizes at once. The Flex
Cooking Zone 2
zone has four zones that are operated by
individual inductors, allowing you to cook
regardless of where cookware is placed on a
Cooking Zone 3
cooking zone.
Cooking Zone 4
With Flex zone Plus, you can use a combination of different cooking zones to
enlarge the cooking area. See the table below for the corresponding sensor to
touch to activate the different combinations.
Cooking Zone 1 burner 2 burner
1
2
3
4
NOTE
• When using only one cooking zone, the diameter of the bottom of the
cookware must be less than 14 cm.
• The hob may take 5-10 seconds to recognize the position of cookware.
• Noises may occur while the hob recognizes the cookware.
• Do not remove cookware during cooking. For safety purposes, the hob
automatically stops if cookware has been removed for more than 5 seconds.
3 burner 4 burner
English 25
2020-06-02 11:21:01