D-Link DCS-6517 User Manual page 45

Section 3: Configuration
IR & ICR
Use this section to configure the IR LED and IR-cut removable filter behavior
for your camera.
The Day/Night mode is set automatically. Generally, the camera uses Day
Automatic:
mode and switches to Night mode when needed. Use the Sensitivity drop-
down box to select when the camera should switch to Night mode. The text
to the right of the drop-down box shows what the current lighting conditions
are like, and you can refresh this information by clicking the Refresh button.
Day mode enables the IR Cut Filter and turns off the IR LEDs.
Day Mode:
Night mode disables the IR Cut Filter and turns on the IR LEDs.
Night Mode:
Set Day/Night mode using a schedule. The camera will enter Day mode at
Schedule
the starting time and return to Night mode at the ending time.
Mode:
D-Link DCS-6517 User Manual 45