D-Link DCS-6517 User Manual page 55

Section 3: Configuration
Event
Create and schedule up to three events with their own settings here. After making any changes, click the Save button to save
your changes.
Enter a name for the event.
Event name:
Toggle this to activate this event.
Enable this
event:
Set the priority for this event. Events with higher priority will be executed
Priority:
first.
Specify the delay time before allowing this event to be triggered again. This
Delay for...:
is used for both motion detection events and digital input triggers.
Specify the input type that triggers the event.
Trigger:
Selecting this will trigger the event when motion is detected during live
Video Motion
video monitoring. Make sure you have enabled motion detection and
Detection:
specified what part of the image to monitor for motion. For more details,
refer to Motion on page 61.
Selecting this will trigger the event in specified intervals. The trigger interval
Periodic:
unit is in minutes.
Selecting this will trigger an event when a signal is detected on the digital
Digital Input:
input of the DI/DO port.
Selecting this will trigger an event when the system boots up.
System Boot:
Selecting this will trigger an event when the camera's connection to the
Network Lost:
network is lost.
D-Link DCS-6517 User Manual 55