D-Link DCS-6517 User Manual page 46

Section 3: Configuration
Lens Control
Setting this to Automatic will allow the camera to automatically adjust its
Focus Mode:
focus. Setting this to Manual will bring up the Focus slider, which you can
use to manually adjust the camera focus.
Click anywhere on the bar to adjust the camera zoom.
Zoom:
If the Focus Mode is set to Manual, this bar will appear. Click anywhere on the
Focus:
bar to adjust the camera focus, or click the Fine-tune focus automatically
button to automatically adjust the focus.
OSD Settings
Select this option to enable the On-Screen Display feature for your camera.
OSD:
This will allow some information to appear in the top-left corner of the
camera's video.
Enter a label for the camera, which will be shown on the OSD when it is
Label:
enabled.
Select this option to enable the time-stamp display on the video screen.
Show Time:
D-Link DCS-6517 User Manual 46