Specifications - Sharp VC-MH80 Service Manual

Format:
V i d e o recording.system:
Video signal:
Recording/playing time:
Tape width:
Tape speed:
Antenna:
Receiving channel:
RF converter output signal:
Power requirement:
Powerconsumption:
Operating temperature:
Storage temperature:
Weight:
Dimensions:
VIDEO
Input:
output:
S/N ratio:
Horizontal resolution:
Input:
output:
Hi-Fi dynamic range:
Normal S/N ratio:
Frequency responce:
Accessories included:
Note:
VHS PAlJSECAMlMESECAMINTSC standard (VCMH80)
VHS PAL/MESECAM/NTSC standard (VGMH90)
Two rotary heads, helical scan system
240 min max. with SHARPE-120 tape (LP mode)
480 min max. with SHARP E-240,tape &P-mode)
480 min max. with SHARP T-.160 tape (EP.mode)
23.39 mm/s (PAL SP) 11.70 mm/s (PAL LP)
33.35 mm/s(NTSCSP) 16.68mm/s(NTSC LP) 1 l.lZmm/s(NTSC EP)
75 ohm unbalanced
VHF Channel 1A-520
UHF Channel E21-US83 (VGMH80)
UHF Channel E21-E69 (VGMH90)
VHF Channel E30-E39 (preset to CH E39 (VGMH80) or CH E36 (VC-MH90))
Approx. 20 W atAC220VI50Hz (VC-MHSO)
Approx. 22W at AC220V/50Hz (VC-MH90)
5°C to 40°C
Approx. 4.5 kg
430 mm (W) x 340 mm(D) x 96 mm (H)
0.5 - 2.0 Vp-p, 75 ohm
45 dB (PAL SP)
250 lines (PAL SP)
0 dBs = 0.775 Vrms
Line: -8 dBs, 47kohm
Line: - 8 dBs, 1 k ohm
85dB type
40dB
(Hi-Fi) 20Hz-20kHz
(Normal) 80Hz-5kHz
75 ohm coaxial cable
Operation manual
Infrared remote control
Battery (2~~s.)
AC plug adaptor (VC-MH90)
AV cable
of our policy of continuous improvement,:we reserve
to alter design and specifications without notice.
The antenna must correspond to the new standard DIN 45325