Sharp VC-MH80 Service Manual page 26

VC-MH80
ASSEMBLE THE MECHANISM' S PARTS RE-
STEPS BELOW.
1. Assembling the pinch roller assembly and the
pinch drive cam (on the front of the mechanism
chassis).
2. Mounting the shifter (on the back of the mecha-
nism chassis).
3. Mounting the master cam (on the back of the
mechanism chassis).
4. Mounting the connection gear, slow brake and
loading motor assemblies (on the back of the
mechanism chassis).
1. Assembling the pinch roller assembly
and' the pinch drive cam (on the front of
the mechanism chassis).
Place the following parts in po+tion ' in numerical
order.
(1) Pinch drive cam 0'
(2) Pinch roller and pinch double-action lever 8
(3)
Open lever 0
,
Fit the
chassis
26
Fit the point of the pinch drive cam to the
fourth tooth of the pinch drive lever,and
insert the pinch drive cam.
pinch drive cam
position.
Pinch Drive Cam
part and the