Table of Contents
Advertisement
1.3.2 Vigor2900VG
LED Indicators
ACT (Activity)
QoS
Phone
(FXS1,FXS2)
WLAN
Printer
WAN
LAN
(P1, P2, P3, P4)
Rear Panels
Connect to the USB printer.
Connect the included power adapter to the power outlet.
Connect to the local networked devices.
Factory Reset
Status
blinking
The router is powered on and running properly.
on
The QoS function is active.
on
The phone is off hook (the handset of phone is picked up).
blinking
A phone call is incoming
on
The Wireless LAN function is enabled.
blinking
Data packets are transmitting over Wireless LAN.
on
The USB interface printer is ready.
orange
A normal 10Mbps WAN link is ready.
green
A normal 100Mbps WAN link is ready.
blinking
Ethernet packets are transmitting.
A normal 10Mbps connection is through its corresponding port.
orange
green
A normal 100Mbps connection is through its corresponding port.
blinking
Ethernet packets are transmitting.
Connect to the analog phone for VoIP communication.
Connect the cable/DSL modem to access the Internet.
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking), press the hole and keep for
more than 5 seconds. When the ACT LED begins to blink rapidly, release the
button. Then the router will restart with the factory default configuration.
Descriptions
Descriptions
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2900V Series and is the answer not in the manual?
Questions and answers