NOTE: You should also set RADIUS Server simultaneously if WEP/802.1x
or WPA/802.1x , WEP/802.1x Only or WPA/802.1x Only mode is
selected.
2. WPA Encryption:
-The WPA encrypts each frame transmitted from the radio using the pre-
shared key (PSK) which entered from this panel or a key got dynamically
through 802.1x.
Pre-Shared Key (PSK): Either 8~63 ASCII characters or 64 Hexadecimal
digits leading by 0x can be entered. For example "0123456789ABCD...." or
"0x321253abcde.....".
3. WEP Encryption:
- 64-Bit: For 64bits WEP key, either 5 ASCII characters or 10 hexadecimal
digitals leading by 0x can be entered. For example, ABCDE or
0x4142434445.
- 128-Bit: For 128bits WEP key, either 13 ASCII characters or 26
hexadecimal digits leading by 0x can be entered. For example,
ABCDEFGHIJKLM or 0x4142434445464748494A4B4C4D.
NOTE: 128 bits WEP is most secure, but has more encryption/decryption
overhead. Note that all wireless devices must support the same WEP
encryption bit size and have the same key. Four keys can be entered here,
but only one key can be selected at a time. The keys can be entered in ASCII
or Hexadecimal. Click the circle under Use next to the key you wish to use.
4. Click OK to save settings.
16
Need help?
Do you have a question about the Vigor2900V Series and is the answer not in the manual?