B. For Static or Dynamic Users
1. Check that if the Enable option is selected.
2. Check that if WAN IP Network Settings is set appropriately. If you select "Specify
an IP address", IP Address, Subnet Mask, and Gateway IP Address have to be
entered the correct value.
C. For PPTP Users
1. Check that if the Enable option is selected.
2. Check that if PPTP Server, Username, Password is entered the correct value
given by your ISP.
3. Check that if LAN2/WAN IP Network Settings is set appropriately. If you select
"Specify an IP address", IP Address and Subnet Mask have to be entered the
correct value.
26