Installing optional M.2 SSD
1
Insert the SSD clip into the slot on the computer.
2
Tighten the M2*3 screw to secure the SSD clip to the computer.
3
Insert the SSD into the connector on the computer.
4
Place the SSD bracket over the SSD and tighten the M2*3 screw to secure it to the computer.
5
Install the:
a
battery
b
base cover
6
Follow the procedure in
Hard drive
Removing hard drive assembly
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
3
To remove the hard drive assembly:
a
Disconnect the hard drive cable from the connector on the system board.
b Remove the screws that secure the hard drive assembly to the computer.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
17