Optical / Coaxial /Hdmi Earc Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices - Hisense HS216F User Manual

3. Press the VOL+/- buttons will be hopping to
adjust the delay time. Set 60 ms maximum
delay.
Tip:
Adjustment range ： [00~60ms]
•
• The audio delay setting is only valid for digital
audio (eg HDMI IN, HDMI eARC, COAXIAL,
OPTICAL).
OPTICAL / COAXIAL /HDMI
eARC Operation
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the button repeatedly on the unit or
on the remote control to select the OPTICAL,
COAXIAL, HDMI eARC mode.
3 Operate your audio device directly for playback
features.
4 Press the VOL +/– button to adjust the volume
to your desired level.
Tip:
• The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player, etc.)
is set to PCM or Dolby Digital (Refer to the
user manual of the input source device for its
audio setting details) with HDMI IN / HDMI
eARC / OPTICAl / COAXIAL input.
• When selecting a different audio format, the
unit will display the following as follows:
Audio (abbreviation)
LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital
Dolby TrueHD
Dolby Digital Plus
Dolby Atmos -
Dolby TrueHD
Dolby Atmos -
Dolby Digital Plus
Display
PCM
PCM
PCM
DOLBY AUDIO
DOLBY AUDIO
DOLBY AUDIO
DOLBY ATMOS
DOLBY ATMOS
14

Bluetooth Operation

Pair Bluetooth-enabled Devices

The first time you connect your bluetooth device
to this player, you need to pair your device to this
player.
Note:
- The operational range between this player
and a Bluetooth device is approximately 26
feet (8m) (without any object between the
Bluetooth device and the unit).
- Before you connect a Bluetooth device
to this unit, ensure you know the device's
capabilities.
- Compatibility with all Bluetooth devices is
not guaranteed.
- Any obstacle between this unit and a
Bluetooth device can reduce the operational
range.
- If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 During ON mode, press the
repeatedly on the unit or the
the remote control to select Bluetooth mode.
"NO _ BT" will show on the display if the unit is
not paired to any Bluetooth device.
2 Activate your Bluetooth device and select the
search mode. "Hisense SOUNDIVA Pro" will
appear on your Bluetooth device list.
- If you cannot find the unit, press and hold the
(BT) button on the remote control to be
searchable. The display will show "BT PAIRING"
and you will hear "Pairing" from the unit.
3 Select "Hisense SOUNDIVA Pro" in the pairing
list. After successful pairing, you will hear
"Paired" from the unit, and the display panel
shows "BT _ IN".
4 Play music from the connected Bluetooth
device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth
device.The Bluetooth device will be
disconnected from the unit after the
"Disconnected" voice prompt.
- Press and hold the
remote control.
button
(BT) button on
(BT) button on the