Erase All Programs; Clear A Scene Or Scenes; Delete A Step Or Steps - Chauvet TFX-24CON Technical Reference Manual

O P E R A T I N G I N S T R U C T I O N S

Erase All Programs

Press 1
& Hold
Button
RECORD
3

Clear a Scene or Scenes

RECORD
REC
EXIT

Delete a Step or Steps

1 .
Record Enable.
Example:
Delete the third step of the
program on Flash button 13
on Page 2.
TFX-24C Users Manual Version 2.02
1. Press and hold the Record button.
2. Tap the Flash buttons 1, 4, 2 and 3 in sequence while holding the
4
Record button. All LEDs will flash, indicating all programs stored in
memory have been erased.
2
1. Record enable.
2. Record a scene or scenes.
3. If you not satisfied with the scene or scenes, you may tap the Rec Clear button while
pressing and holding the Record button, all LEDs will flash, indicating the scenes have
been cleared.
2 .
STEP
Tap the Step button to scroll
to the step you wish to
delete.
1. Record enable.
2. Tap the Mode Select button to select CHASE
3. Tap the Page button until Page 2 LED lights.
4. Tap the Flash button 13 while pressing and down the Edit button, the Scene LED
lights.
5. Tap the Step button to scroll to the third step.
6. Tap the Delete button to delete the step.
7. Tap the Rec Exit button while pressing and holding down the Record button to exit
Edit mode.
14
3 .
DELETE
Tap the Delete button when
you reach to the step you
wish to delete, all LEDs will
flash briefly indicating the
deletion of the step.
SCENE mode.
4 .
RECORD
REC
EXIT
Continue steps 2 and 3 until
all the unwanted steps have
been deleted.
Tap the Rec Exit button
while pressing and holding
down the Record button, the
Scene LED goes out,
indicating the exit of Edit
mode.