Lloyd's LC-1298 Quick Installation Manual page 22

Choose the latch-bolt position according to the opening direction of your door.
Inside
Note:
The orientation of the lock body should always be with the dead-bolt at the bottom
and the latch-bolt at the top as shown in the image of the next section.
10. To change the direction of the latch-bolt
1. Push the latch-bolt locking mechanism upwards
2. Push the latch-bolt inside the lock and rotate it 180 degrees to change its orientation.
Free the latch-bolt and verify that the locking mechanism is back to the original position
Latch-bolt
Dead-bolt
11. Front Panel installation
1. Insert 2 connecting columns in the front panel
2. Insert the adequate Steel square in the front panel
3. Pass the connection cable over the hole of the door
4. Align and insert the front panel in the lock body
22
Outside
Latch-bolt locking
mechanism
Iron spindle