Advertisement
Available languages
Available languages
1.
Usage considerations
Note:
Keep close to you a cross point screwdriver and 4 "AAA" batteries before installation.
1. In the factory configuration you will be able to release the lock with any digital fingerprint,
NFC card or with the password "123456" followed by the "#" key
2. The lock has 5 opening options: Fingerprint, access cards (NFC), numeric codes,
physical key, and with a remote request from the App
3. If the power is insufficient, an alarm notification will appear and the unlock function can
only be used approximately 50 times before it runs before the batteries runs out of power,
however, the Wi Fi function might be deficient if the battery is low. Replace the batteries
with 4 new ones. When the batteries run out of power, it is possible to connect an external
source of power through the emergency Micro USB port. To connect the device directly to
the power supply, it is recommended to use an AC / DC adaptor with a 100-240 V~
50/60 Hz input and a 5 Vdc 2 A output (not included)
4. Do not use corrosive material to clean the surface
5. If you are unable to release the lock with the numeric code, digital fingerprint, NFC card
or from the App, use the physical key. Always keep the key with you or keep it in a safe
place
6. If the lock hasn´t been used for a long time, the unlocking could take 3 seconds or more
7. The lock is suitable for doors with a thickness of 3.8 cm (1.49 in) to 8 cm (3.14 in)
8. Working temperature: -25°C a 60°C
2.
Contents
• 1 Front panel
• 1 Rear Panel
• 1 Strike plate
• 1 Strike box
• 3 Iron spindles
• 4 Connecting columns
• 4 Screws for connecting columns
• 1 Lock body
• 2 Screws for lock body
• 2 Screws for strike plate
• 2 Access cards
• 2 Keys
17
Advertisement
