Advertisement
Available languages
Available languages
7.
Door handle opening
Stand outside the door. Adjust the direction of the handle and latch according to the opening
direction when installing the lock.
Right opening
Right to the inside
Inside
Outside
8.
Left or Right Adjustment
According to your needs, adjust the handle to open to the left or the right. With a screwdriver,
loosen the screw of both handles to be able to rotate them 180 degrees. Once you've done
that, fix the screw again.
Front panel
Rotate 180 degrees
Double
Do not remove
Remove the screw
the screw
with a screwdriver
from this hole,
and fix it in the
because if it
new position after
is broken the
rotating the handle
warranty will not
apply
180 degrees
Right opening
Verify that the
inner arrow points
downwards or to the
word "Double"
Front
panel
9.
Lock body installation
For more information watch the
video in the following QR Code.
Right to the outside
Inside
Outside
Rear panel
Rotate 180 degrees
Double
Rear
panel
Left to the inside
Inside
Outside
Right
Remove the screw
with a screwdriver
and fix it in the
new position after
rotating the handle
180 degrees
Left opening
Verify that the
inner arrow points
downwards or to the
word "Double"
Left opening
Left to the outside
Inside
Outside
Left
Double
Front
panel
Rear
panel
21
Advertisement
