Ricoh Pro C5300 Series Adjustment Settings For Operators page 20

CIP Training C7200 series CIP Training
Adjustment Settings for Operators Adjustment Settings for Operators
0813: Punch Position: Across Feed
Adjust the vertical position of the punch holes when using Finisher SR5110 or Booklet Finisher
SR5120. Press [ + ] to move the position forward (up), or [ - ] to move it backward (down).
2 Holes Left
Paper feed direction
Setting Items
2 Holes Type JP / EU
3 Holes Type US
4 Holes Type EU
4 Holes Type NE
2 Holes Type US
0814: Punch Position: With Feed
Adjust the horizontal position of the punch holes when using Finisher SR5110 or Booklet
Finisher SR5120.
Press [ + ] to move the position toward the top edge (left) relative to the paper feed direction,
or [ - ] to move it toward the bottom edge (right).
2 Holes Left
Paper feed direction
Pro C5300 series
2 Holes Top
CVK007
Default
Value
0.0
2 Holes Top
CVK008
Max. Min.
Step
Value Value
2.0 -2.0 0.5
Unit
mm