Honeywell Fire-Lite FL-PS6 Instruction Manual page 30

Table of Contents

LED Indicators

Output Circuit Status LEDs (red)

Output inactive

Output active

Output Circuit Trouble LEDs (yellow)

No Fault

Fault Condition (Normal/Standby Mode):

Wire Supervision

Class A or B Open circuit

1 short blink (250ms)

Fault Condition (Normal/Standby Mode):

Wire Supervision

Class A or B Short Circuit

2 short blinks (250ms)

Fault Condition:

Aux Power Supervision

Class A Open circuit

(ZNAC-PS Circuit #1 and #2 only)

3 short blinks (250ms)

Fault Condition:

Power limit condition (individual ckt overload)

4 short blinks per individual circuit (250ms)

Fault Condition:

Power limit condition (panel overload)

4 short blinks on all output circuits (250ms)

Operating Mode Fault:

Power Supply not in Normal Operating mode

1 short blink from right to left across all output

circuits.

Set positions 9 and 10 on S1 to the ON

position.

LED is OFF

LED is ON constant

LED is OFF

Repeating LED blink pattern (non-diagnostic mode and diagnostic mode)