NEC MultiSync P435 User Manual page 91

INPUT MENU
INPUT SIGNAL INFORMATION
CURRENT INPUT
RESOLUTION
FREQUENCY
COLOR FORMAT
HDR EOTF
COLOR DEPTH
(SIGNAL/DISPLAY)
HDCP
VIDEO RANGE
VIDEO ID CODE
OVERSCAN
ADVANCED
INPUT SIGNAL SETTINGS
DisplayPort
DisplayPort1, DisplayPort2,
OPTION (DisplayPort)* inputs only
2
DisplayPort VERSION
HDCP VERSION
HDR
EQUALIZER
HDMI
HDMI1, HDMI2, OPTION (TMDS)*
inputs only
HDMI MODE
HDCP VERSION
HDR
EQUALIZER
Shows input signal information.
These functions shows their current settings in the [INPUT SIGNAL INFORMATION] for the selected input
signal.


NOTE: The functions listed here do not have settings for all input terminals available.
Configure settings specific to the video input terminal.
Selects the type of DisplayPort version.
The following settings can be made according to the input selection.
When receiving an 8K signal, select [1.4] for [DisplayPort1].
DisplayPort1: 1.1a, 1.2, 1.4
DisplayPort2: 1.1a, 1.2
OPTION (DisplayPort): 1.1a, 1.2
Select [SST] or [MST] when [1.2] or [1.4] is set.


NOTE: • [MST] is available when input is DisplayPort1.

•
[1.4] is available when input is DisplayPort1.

•
If [1.4] is selected, the following restrictions are applied:

-
Deactivates [MULTI PICTURE], [MOTION] in [SCREEN SAVER], [STILL], [POINT ZOOM],
[IMAGE FLIP], [QUICK INPUT CHANGE], [DUAL DAISY CHAIN MODE], [AUDIO INPUT],
[ROTATE], [TILE COMP], [TILE CUT] and [DP to HDMI CONVERT].

-
[H MONITORS] and [V MONITORS] in [TILE MATRIX] is up to [2].
Depending on the selection in the [DisplayPort VERSION], set items as below.
1.1a: HDCP 1.3
1.2: HDCP 1.3, HDCP 2.2
1.4: HDCP 1.3, HDCP 2.2


NOTE: When [DisplayPort VERSION] is set [1.1a], this function is disabled.
Depending on the selection in the [DisplayPort VERSION], set items as below.
1.1a: DISABLE
1.2: ENABLE, DISABLE
1.4: ENABLE, DISABLE


NOTE: When [DisplayPort VERSION] is set [1.1a], this function is disabled.
Compensates the video signal for better image stability.
If the image flashes or picture noise occurs, please change the setting.
Sets the HDMI mode.
2
Selects the type of HDMI mode (version) [MODE1] or [MODE2].


NOTE: When this setting is changed, the OSD will be closed automatically.
Select [HDCP 1.4] or [HDCP 2.2].
MODE1: DISABLE
MODE2: ENABLE, DISABLE


NOTE: If [HDMI MODE] is set to [MODE1], this function is disabled.
Compensates the video signal for better image stability.
If the image flashes or picture noise occurs, please change the setting.
English−87