NEC MultiSync P435 User Manual page 29

%
MUTE Button
Mutes the monitor's audio and video output.
Press it again to unmute the monitor's audio and video
output. See "MUTE SETTING" on page 105
^
AUDIO INPUT Button
Selects the audio input source [IN1], [IN2], [HDMI1],
[HDMI2], [DisplayPort1], [DisplayPort2], [OPTION]*
[COMPUTE MODULE]*
2
* : This function depends on which Option Board is installed in the monitor.
1
* : This input is available when the optional Raspberry Pi Compute Module
2
Interface Board and Raspberry Pi Compute Module are installed.
See page 83.
&
PICTURE MODE Button
Cycles through the picture modes [NATIVE], [RETAIL],
[CONFERENCING], [HIGHBRIGHT], [TRANSPORTATION]
and [CUSTOM]. See page
*
ASPECT Button
Cycles through the picture aspect ratios [FULL], [WIDE]*,
[1:1], [ZOOM] and [NORMAL]. See
*: HDMI1, HDMI2, OPTION (TMDS)*
* 1 : This input is available when the optional Raspberry Pi Compute Module
Interface Board and Raspberry Pi Compute Module are installed.
* 2 : This function depends on which Option Board is installed in the monitor.
(
STILL Button
ON/OFF button: Activates/deactivates still picture mode.


NOTEN:
• This function is released if any following
functions is changed: [ASPECT], [MULTI
PICTURE], [TILE MATRIX], [MOTION] in
[SCREEN SAVER], [POINT ZOOM], [IMAGE
FLIP], [QUICK INPUT CHANGE], [OVERSCAN],
[DUAL DAISY CHAIN MODE], if you change
the [AUDIO INPUT] setting, or set [DisplayPort
VERSION] of [DisplayPort1] to [1.4] while [STILL]
is active.

• This function is disabled when one of the
following functions is active: [MULTI PICTURE],
[MOTION] in [SCREEN SAVER], [POINT
ZOOM], [TILE MATRIX], [IMAGE FLIP], [QUICK
INPUT CHANGE], [DUAL DAISY CHAIN MODE],
[ROTATE] or if input is set to [DisplayPort1] then
[DisplayPort VERSION] is set to [1.4].

• If the input signal is [OPTION], this button's
action depends on which Option Board is
installed in the monitor.
for details.
.
35.
page 36.
, COMPUTE MODULE*
2 1
)
ACTIVE PICTURE Button
Selects the active picture when Multi Picture Mode is
enabled. See
-
IMAGE FLIP Button
Toggle switches between [H FLIP], [V FLIP], [180° ROTATE]
and [NONE]. See
and
1
=
MULTI PICTURE Buttons
ON/OFF button: Turns Multi Picture Mode on and off.
MODE button: Switches between the available Picture-
In-Picture (2PIP) and Picture-By-Picture (2PBP or 4PBP)
modes.
CHANGE button: Swaps the selected inputs between
Picture 1 and Picture 2 when 2PIP is set.
PICTURE ASPECT button: Selects the active picture frame
aspect.
For more information see


NOTEN:
inputs only.
q
REMOTE ID Button
Activates the REMOTE ID function. See
w
MTS Button
For use with an Option Board. The function depends on
which Option Board is installed in the monitor.
-
e
*: When using with an Option Board, the function depends on which Option
Board is installed in the monitor. Refer to the Option Board's user's manual
for further information.
English−25
page 94.
page 94.
page 94.
If you press SET/INPUT ZOOM button while Multi
Picture is ON, you can change the active picture's
picture size.
Button*
page 58.