Components
Surface Units:
Left Front(LF)
Element
Test procedures
1. Refer to page 3-9,10 for the servicing procedure
2. Set the Multiple meter scale to the R x 1
3. Disconnect wires from cook-top elements
4. Touch the ohmmeter test leads to the element
terminal 1 and 2.
The meter should indicate 10 Ω ± 10 %
5. Use the LCR meter to measure the inductance
value. Touch the LCR meter leads to the element
terminal 1 and 2. The meter should indicate
45.0 uH ± 5 % inductance value in condition of
1kHz and 0.3V.
2
1
4-8
Results