Setting The Clock; To Turn On/Off The Oven Light; Timer On/Off; Setting Pad: 7 Types Of Category - LG LSE4617ST Service Manual

1. SETTING THE CLOCK

1. Set both oven mode knobs to the Off position.
2. Press and hold Cook Time for three seconds.
3. Press plus(+) or minus(-) to select the desired
time. Plus(+) to increase the time and minus(-)
to decrease the time.
4. Press Start to enter the time and start the
clock.

2. TO TURN ON/OFF THE OVEN LIGHT

The oven light automatically turns ON when the
door is opened. The oven light may also be
manually turned ON or OFF by pressing the
OVEN LIGHT pad
Note: The oven light cannot be turned on if self-clean
feature is active.

3. TIMER ON/OFF

The Timer On/Off serves as an extra timer in the
kitchen that beeps when the set time has run out. It
does not start or stop cooking.
The Timer On/Off feature can be used during any of
the oven control functions.
To set the Timer:
1. Set the oven mode knob to the Off position.
2. Press the Timer On/Off. 0:00 with HR inside it
appears and Timer flashes in the display.
3. Press plus(+) or minus(-) to set the desired
time. Plus(+) to increase the time and minus(-)
to decrease the time.
4 . Press Timer On/Off to start the Timer.
The remaining time countdown appears in the
display.
Note: If Timer On/Off is not pressed, the timer returns to
the time of day.

4. SETTING PAD: 7 types of category

1) CHANGE HOUR MODE ON CLOCK
1. Set the oven mode knob to the Off position.
2. Press and hold Start Time for 3 seconds.
3. Press plus(+) or minus (-) to set the desired
hour mode on the clock.
4. Press Start to accept the desired change.
USING YOUR RANGE
2-6
2) CONVECTION AUTO CONVERSION
1. Set the oven mode knob to the Off position.
2. Press and hold Start Time for 3 seconds.
Then press Start Time until. Auto appears in
the display.
3. Press plus(+) or minus(-) to enable or
disable the feature.
4 .Press Start to accept the change.
3) THERMOSTAT ADJUSTMENT
1. Set the oven mode knob to the Off position.
2. Press and hold Start Time for three seconds.
Then press Start Time repeatedly until AdJU
appears in the display.
3. To increase the temperature, press plus (+)
until the desired amount appears in the
display.
To decrease the temperature, press minus
(-) until the desired amount appears in the
display.
4. Press Start to accept the change.
4) PREHEATING ALARM LIGHT ON/OFF
1. Set the oven mode knob to the Off position.
2. Press and hold Start Time for three seconds
Then press Start Time repeatedly until PrE
appears in the display.
3. Press plus(+) or minus(-) to turn the function
on/off.
4. Press Start to accept the change.
5) BEEPER VOLUME
1. Set the oven mode knob to the Off position.
2. Press and hold Start Time for three seconds.
Then press Start Time repeatedly until Beep
appears in the display.
3. Press plus(+) or minus(-) to select the
desired volume.
4. Press Start to accept the change.
6) TEMPERATURE UNIT (°F or °C)
1. Set the oven mode knob to the Off position.
2. Press and hold Start Time for three seconds.
Then press Start Time repeatedly until Unit
appears in the display.
3. Press plus(+) or minus(-) to select
F(Fahrenheit) or C(Centigrade).
4. Press Start to accept the change.