Operation; Using The Volume Keys; Adjusting The Sound Level Balance; Select Audio Profile (Equalizer) - Amplicomms TV3500 Manual

Operation

Important: Hearing damage due to high volumes!
This headset allows you to set higher volumes than conventional headset (up to
125 dB!). This can cause hearing damage for persons with healthy hearing and
especially children.
• Do not continuously expose yourself to high volumes.
1. Before using the headset, set the volume on the remote control to a low
value.
2. Switch ON the audio source (TV/Hifi).
3. If the headset is OFF, the LED will be OFF. Short press the
headset to turn on it.
4. Spread the headset arms until the ear buds can be inserted in the ears.
Please note the ear buds can be angled through a movement up, down or
sideways so as to enter the ear a little deeper. This will improve the sound
quality and volume. Gently press the ear buds further into the ear to find a
comfortable position for the ear buds and an ideal position for the sound.
5. Adjust the sound volume by pressing the
control.
Note: When the headset battery level is low you will hear 2 beeps every minute
in the headset.

Using the volume keys

Point the remote control at the base, press the
comfortable loudness.

Adjusting the sound level balance

Point the remote control at the base, press the
headset left or right receivers sound level balance.
Select the audio profile (Equalizer)
Point the remote control at the base, press the
available audio profiles.
Setting
1
2
3
4
Note : To go back to factory default settings, short press the pair button at the
back of the base.
Effect
Flat
Bass Boost
Treble Boost
Clarity
or
or
or
button to select one of the 4
22
button on the
buttons from the remote
buttons to achieve a
buttons to adjust the