Samoa NEXU Parts And Technical Service Manual page 57

EN
12. HOSE REEL CALIBRATION
Go to the configuration menu, two consecutive access codes are required.
The first one is .... (four dots) and then the system will ask for another one
which is NEXU. You will go to the following screen:
Then go to "Calibration" and follow the next steps.
Introduce the hose reel you want to calibrate.
Introduce the volume of the calibrated measure in which the calibration.
Press "Start".
Deliver the quantity that was set in the "Requested Quantity" field.
Once you have reached the quantity defined in the "Requested Quantity"
field, please press Enter.
57
R. 06/21 838 861
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com