Samoa NEXU Parts And Technical Service Manual page 53

7. MANAGER
7.6 DEVICES
7.6.5 AIR SV
In this screen you can set the date/time in which the solenoid valve is
open in automatic mode.
You can set it to manual mode by choosing the option (AUTOMATIC /
MANUAL).
7.6.6 MOBILE UNIT
This screen shows a complete situation of the connected Mobile Units.
• First column: There is a little picture of the device.
• Second column: The address is shown. It represents the number of
the local parameter. In this case, the UValve and the UNet must have
the same number.
• Third column: It shows the description of the device. This
description is the one that was set in the configuration menu.
• Fourth column: It shows the loaded device firmware version.
• Fifth column: It shows the way the device is connected. In this
case, the mode is always Wi-Fi ® (Wireless)
• Sixth column: The IP address of the UDat is shown.
• Seventh column: A date/time is shown as well. This indicates the
last moment in which right communication was held between the
UNet and the device. If date/time is old (more than a few minutes),
it means that there is something wrong with the communication.
7.6.7 LUBE TRUCK
• First column: There is a little picture of the device.
• Second column: The address is shown. It represents the number of
the local parameter. In this case, the UValve and the UNet must have
the same number.
• Third column: It shows the description of the device. This
description is the one that was set in the configuration menu.
• Fourth column: It shows the loaded device firmware version.
• Fifth column: It shows the way the device is connected. In this
case, the mode is always Wi-Fi ® (Wireless)
• Sixth column: The IP address of the UDat is shown.
• Seventh column: A date/time is shown as well. This indicates the
last moment in which right communication was held between the
UNet and the device. If date/time is old (more than a few minutes),
it means that there is something wrong with the communication.
In the upper right part of the window there are three icons.
The first one refreshes the readings; the second one allows to make a
search in the table and the third one allows to export data to a MS Excel
spreadsheet.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
EN
53
R. 06/21 838 861