Advertisement
About YoLink Control
YoLink Control is our unique device-to-device control technology. Using YoLink Control, YoLink
devices can be controlled without the Hub or an internet connec on. (Use of YoLink Control is
op onal; you can use the Automa on feature in the app OR use YoLink Control, but YoLink
Control offers the benefit of opera on without the Hub or internet connec on.)
One device controls another, directly. A device that sends out commands is called the controller. A
device that receives the commands is called the responder. Examples of a controller are a Door
Sensor or YoLink Plug Mini, while examples of a responder are another In-wall Switch or anoter
YoLink Plug Mini
Pairing
To configure your YoLink Plug Mini as a controller, Turn on the plug using POWER bu on
or via YoLink app (verify the Status LED of YoLink Plug Mini displays blue). Press and hold
the POWER bu on for 5-10 seconds un l the LED quickly blinks blue
To configure a In-wall Switch as the responder. Turn on the switch using POWER bu on or
via YoLink app (verify the Status LED of In-wall Switch displays white). Press and hold the
POWER bu on for 5-10 seconds un l the LED quickly blinks blue
Upon pairing, the LED will stop blinking (this may happen a er only blinking two or three mes)
13
Advertisement
