Seitron HYGGE HOME Quick Manual

ELECTRONIC PROGRAMMABLE THERMOSTAT HYGGE
TECHNICAL FEATURES
Power supply: Battery 2x1.5V
Size: 78x125x30,5 mm (LxHxD)
INSTALLATION
1
The Hygge programmable thermostat can be installed on a wall or it can be
2
put on a flat horizontal surface (e.g. a table) with or without the provided
magnetic stand.
16mm
GATEWAY HYGGE WAY
TECHNICAL FEATURES
Power supply: 5V through power grid plug
Size: 78x125x30,5 mm (LxHxD)
INSTALLATION
1
2
The IoT Gateway is only used stable on a flat surface.
WARNING
Before placing the device on its final position, make sure that the WiFi signal is present and that the device
receives the radio signals transmitted by the Hygge programmable thermostat correctly.
3
Download the Seitron Smart app.
Start the App, sign in as a new user and make the Login by entering your email and password.
4
Then complete the configuration of the IOT GATEWAY.
size AAA. Software class:
Thermoregulation class:
Take off the battery compartment cover and correctly insert
the featured batteries (according to the correct
Software class:
Connect the provided power adapter, on the back of the device.
HYGGE HOME
Programmable thermostat radio controlled Kit
Weekly programmable
A
I
polarity).
LOGIC SYSTEM DIAGRAM
A
Hygge
DRR32M
WARNING
THE DEVICES INSIDE THIS KIT
INSTALLATION IS COMPLETE, THEY ARE READY TO USE.
App Android and iOS for Smartphone
Go to www.seitron.com and download the complete manual
Hygge Way
230Vac
ROUTER
230Vac
ARE FACTORY PRE-MATCHED: ONCE THE MECHANICAL
CLOUD
Seitron Smart
Temperature under control
WIST02960ESE 035449 281020