Set Supervisor Password - AZZA 601 Series User Manual

3.12 SET SUPERVISOR PASSWORD

3.12 SET SUPERVISOR PASSWORD
3.12 SET SUPERVISOR PASSWORD
CMOS Setup Utility – Copyright ( C ) 1984 - 2000 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PNP/PCI Configuration
PC Health Status
ESC : Quit
F10 : Save & Exit Setup
The "SUPERVISOR PASSWORD" is for you to control unauthorized access to your BIOS
CMOS Setup or Booting into the your PC system. The Supervisor Password option is
used together with the Security Option in section.
When "Setup" is selected in Security Option When "Setup" is selected in Security Option
When "Setup" is selected in Security Option
If you want to change the BIOS setting, you will have to key-in the Supervisor
Password so that you can start the BIOS CMOS Setup Utility and change the system
setting.
When "System" is selected in Security Option When "System" is selected in Security Option
When "System" is selected in Security Option
When turn on the PC system, it will request you to enter the Password in order to
boot up your system. Without the correct password, the PC system will stop and the
operation system will not be loaded.
BIOS SETUP
BIOS SETUP
Time, Date, Hard Disk Type ...
46
Frequency / Voltage Control
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
↑↓→← : Select Item
(Shift)F2 : Change Color