Steps
Place the palmrest assembly on a flat surface.
Next steps
1. Install the speakers.
2. Install the
system
board.
3. Install the
Input Output
4. Install the
display
assembly.
5. Install the keyboard.
6. Install the
WWAN card
7. Install the battery.
8. Install the
base
cover.
9. Follow the procedure in
Removing palmrest assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove
WWAN card
5. Remove keyboard.
6. Remove the
display
assembly.
7. Remove
Input Output
8. Remove
system
board.
9. Remove speakers.
About this task
The following image indicates the location of the palmrest assembly and provide a visual representation of the removal
procedure.
board.
for 4G LTE enabled systems.
after working inside your
before working inside your
for 4G LTE enabled systems.
board.
computer.
computer.
Removing and installing components
59