Dell Chromebook 3100 Service Manual page 53

Steps
1. Peel the conductive tape that secures the display cable in place from the left display hinge.
2. Remove the four (M2.5x2.5) and two (M2x3) screws that secure the left and right display hinges.
3. Remove the display hinges from the display back cover.
Installing the display hinges
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the display hinges and provides a visual representation of the installation
procedure.
Removing and installing components 53