Installing & Removing The Click & Go™ Adaptors - Britax Steelcraft one 2 Instruction Manual

Baby Capsule
Sold Separately
Installing & Removing the Click & Go™ Adaptors
WARNINGS:
THE ONE 2 CLICK & GO™ ADAPTORS (SOLD
SEPARATELY, CONTACT CUSTOMER SERVICE) MUST BE
ATTACHED TO THE STROLLER FRAME BEFORE INSTALL
THE BRITAX SAFE-N-SOUND UNITY NEOS BABY
CAPSULE OR THE BRITAX SAFE-N-SOUND UNITY BABY
CAPSULE ISOFIX COMPATIBLE.
A
A
Select the Click &
Go™ receiver that has a
coloured dot and align
with the coloured dot
on the frame socket.
Note: Coloured dots are
only on one side of the
frame socket. Firmly
press down on the Click
& Go™ adaptors until you
hear a ' c lick' and a green
indicator can be seen
through a window in the
frame socket. Repeat
on the other side with
the receiver with no
coloured dot. To ensure
the receiver is engaged
before placing the baby
capsule.
B
C
D
B
To remove the Click &
Go™ adaptors, press in
and hold the button on
the top of the receiver
and pull up the adaptors
out of the frame
sockets.
C
You can use the Click
& Go™ adaptors with
extension adaptors.
Just follow step A.
D
You can use the Click
& Go™ adaptors at the
Second Seat sockets if
you wish to attach Unity
baby capsule at the
Second Seat position.
Just follow step A.
ONE 2 | 41
V2