Prior To Initial Use; Fill With Water - Delta essentials GT-SI-01-UK Instruction Manual

Prior to initial use

Unpacking
1. Remove the iron from the box and remove the packaging.
2. Remove the cardboard cover from the soleplate.
3. Wipe the soleplate with a soft cloth.
Note
The cardboard cover protects the soleplate during transport. After removal, it
can be disposed of, if no longer required.
4. Check whether the iron is obviously undamaged.
Ironing for the first time
Production residues can remain adhered to the soleplate during manufacturing. Therefore,
we recommend that you first iron an old cotton towel, or similar.
Note
During initial use, a slight odour can occur, which, however, is harmless and
quickly dissipates. Ensure sufficient ventilation.
1. Fill the tank half way, see next section.
2. Iron an old cotton towel, or similar, see page 10.
3. Iron with steam, see page 11, until the tank is empty and no more steam is discharged.

Fill with water

HAZARD
- Remove the power cord from the socket before filling with water. If water has
run over the iron during filling, the appliance must first dry completely before
being connected to the power supply
- The discharged steam and the soleplate become very hot during use. Do not
touch it.
Before you can use the steam, steam shot and spray function of the iron, you must fill water
into the tank. You can fill with normal tap water or distilled water.
With particularly hard tap water, it is better to use distilled water. You can obtain
information about the water hardness from your water supplier.
Once you have filled the iron with distilled water, you should also use it in the future
and not use tap water again.
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
WEB SUPPORT info@globaltronicssupport.com
8 Model Number: GT-SI-01-UK