Delta essentials GT-SI-01-UK Instruction Manual page 5

Ensure that the socket is well-accessible, so that you can remove the mains plug quickly,
if necessary.
Do not use the iron:
- the appliance or the accessories are damaged,
- the power cable or plug are damaged,
- the appliance has fallen on the floor.
Ensure that the power cable cannot be damaged by sharp edges or hot items, e.g. by
the hot soleplate.
Do not leave the iron unsupervised, as long as it is connected to the power supply.
Disconnect the mains plug from the socket:
- if you are not using the appliance or interrupt ironing (also with short
interruptions!),
- before cleaning or packing it away,
- before filling with or pouring out water
- if an obvious fault occurs during operation,
- in a thunder storm.
Always pull on the plug and not on the cable.
Also remove the mains plug from the socket, if you only intend to interrupt ironing for
a short time. However, always turn the temperature control knob to 0 first.
Do not carry out any modifications to the appliance or its mains cable. Only have
repairs carried out by a professional workshop, as appliances that have not been
properly repaired can be hazardous to the user. Also pay attention to the enclosed
guarantee conditions.
If the mains cable of this appliance should be damaged, it must be replaced by the
manufacturer, its customer service or a similarly qualified person, in order to avoid
hazards. The power cable is a specialised cable.
Burning/scalding and fire hazard
The soleplate becomes very hot during use. Do not touch it and only touch the iron
on the handle. Never iron your clothing or other textiles on the body.
The escaping steam is very hot. Do not touch it. Never point the soleplate and steam
shot at people or animals.
Never place the iron with the hot soleplate downwards on a table, work surface, or
similar. Always place the iron on its stand base or the designated and appropriate stand
surface on your ironing board.
Always use a stable, heat-resistant and stable surface for ironing, such as a sturdy
ironing board or for placing the iron on its stand base.
Do not leave the appliance unattended if it is heating up or still cooling down.
Allow the iron to cool off completely before cleaning or putting it away.
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
WEB SUPPORT info@globaltronicssupport.com
Model Number: GT-SI-01-UK 5