Delta essentials GT-SI-01-UK Instruction Manual page 11

Dry ironing
1. Slide the steam controller to the 0 symbol.
2. Iron the laundry as soon as the orange control lamp goes off.
Note
Do not iron over metal buttons, zippers, etc. This could scratch the soleplate.
Steam ironing
HAZARD
The escaping steam is very hot. Do not touch it.
1. Heat up the iron, see page 10.
2. Set the required quantity of steam using the steam controller:
no steam
small amount of steam
medium amount of steam
large amount of steam
3. Iron the laundry, whereby steam is discharged as soon as you hold the iron horizontally.
Please note:
Set the quantity of steam using the steam controller. If you slide the steam controller
to 0 or hold the iron vertically, no more steam is discharged.
If the iron drips, this can have two causes. You have ...
- ... set a temperature that is too low. Rectification: Set a higher temperature.
- ... set a quantity of steam that is too strong. Rectification: Set the steam controller
to a lower quantity of steam.
Steam shot
HAZARD
The escaping steam is very hot. Do not touch it. Never point the steam shot at
people or animals.
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
WEB SUPPORT info@globaltronicssupport.com
Model Number: GT-SI-01-UK 11