Table of Contents
Advertisement
Note
Fabrics such as polyacrylic, acetate-polyamide mixed fabrics and similar must not
be treated with the steam shot.
Please note the care information and symbols in the textiles to be ironed.
Textiles that are labelled with care symbols
usually be treated.
Fabrics, such as wool, wool mixed fabrics, silk or velvet are sensitive. Steam these
textiles from a larger distance.
Proceed as follows:
1.
Hang the textiles that you intend to smooth on a hanger or line.
2.
Fill the tank with water, see page 8, and slide the steam controller to the symbol
maximum steam quantity).
(
3.
Set the temperature control knob to MAX. Wait until the orange control lamp goes
out.
4.
Stretch the hanging textile with your free hand.
5.
Hold the iron vertically at a distance of approx. 15 to 10 cm to the textile and press
the steam shot button briefly 1x.
6.
Let the steam penetrate the fabric for a few seconds. Then, you can steam the textile
again.
7.
Let the textile hang until it is dry.
After use
HAZARD
- Do not leave the appliance unattended if it is heating up or still cooling down.
- Allow the iron to cool off completely before cleaning or putting it away.
CAUTION
Always place the iron on its stand base or the designated and appropriate stand
surface on your ironing board.
1.
Slide the steam controller to 0.
2.
Set the temperature control knob to 0.
3.
Disconnect the mains plug from the socket.
4.
Empty the tank. Flip open the cover and hold the iron upside-down over a sink. Press
the spray button several times, in order to remove the last water residues from the
tank.
5.
Place the iron on its stand base or the appropriate stand surface on your ironing board.
6.
Allow the iron to cool off completely.
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
WEB SUPPORT info@globaltronicssupport.com
Model Number: GT-SI-01-UK
and
are marked on the iron can
13
Advertisement
Table of Contents
