Use Instructions - Vaporesso XIRON User Manual

USE INSTRUCTIONS

1. Install or replace the coil
Pull out the pod and then pull out the used coil. Install a new
one firmly. Reattach the pod back into place.
2. Fill the E-liquid
Pull out the silicon plug on top. Fill the e-liquid through the
slot. Reattach the silicon plug back into place. If it's your first
time filling the e-liquid of this pod, please wait for 5 minutes
for the e-liquid to soak into the coil.
3. Adjust the Airflow
To adjust the airflow volume, please rotate the air-inlet ring on
the side of the battery.
4. System Operating
(1) Power on/off: press the power button 5 times in 2s.
(2) Lock/unlock the Buttons: press the power button 3 times
continuously to lock or unlock the "+" button and "-" button.
2 English