Use Instructions - Vaporesso Target 80 User Manual

USE INSTRUCTIONS

1. Install the Tank
Install the tank to the battery by screwing the 510 thread. Make sure they are firmly connected.
2. Replace the Coil
- Place the drip tip of the pod face down, and pull out the used coil;
- Install a new coil to the pod;
- Press the coil to align the coil base with the pod.
* Refer to the figure 1.
3. Fill E-liquid
- Unscrew the top cap from the pod;
- Fill e-liquid through the filling slot;
- Screw the top cap to reinstall it back into place as shown;
- Please wait 5 minutes for the e-liquid to soak into the coil completely.
* Refer to the figure 2.
4. Adjust the Airflow
Please rotate the pod to match the air-inlet port to adjust the airflow volume.
5. Power On/Off the Device
Power on/off: press the power button 5 times in 2s.
6. Power Adjustment
TARGET 80 Kit is using the powerful GTX coil platform, and the suggested power need to be noticed
before start vaping.
GTX MESH Coils GTX 0.2Ω MESH
Suggested Power 45-60W
7. Start Vaping
Press the power button to enjoy extraordinary vaping experience.
E N G L I S H
GTX 0.3Ω MESH
32-45W
English
1