Enlarged View; Specifications; Use Instructions - Vaporesso XROS 3 MINI User Manual

ENGLISH
Thank you for choosing Vaporesso product. Please read
this instruction carefully before use to ensure a perfect
experience.
If there is any additional requirement about this product,
please consult the local agent or contact us through our
website: www.vaporesso.com

ENLARGED VIEW

SPECIFICATIONS

Dimensions: 99.2*23.6*13.8mm
Pod Capacity: 2ml
Pod Resistance: 0.6Ω
Battery Capacity: 1000mAh
Charging: DC 5V/1A, Type-C
Mouthpiece
Filling Hole (Red)
LED Indicator
Type-C
Charging Port
FIGURE

USE INSTRUCTIONS

1. Install & Replace the Pod
Pull out the pod from the battery and install the new one.
*If it's the first time using the device, please tear off the
sticker of the pre-installed pod.
2. Fill the E-liquid(Refer to FIGURE)
Snap off the mouthpiece then squeeze the e-liquid through
filling slot. After filling, put the mouthpiece back and make
sure it's shut firmly.
*If it's the first time filling the e-liquid, please wait 5
minutes for the coil to prime.
3. Start Vaping
The device is draw-activated. Inhale directly through the
mouthpiece and exhale to start vaping.
4. Check the Battery Level
Green: 70%~100% (High)
Blue: 30%~70% (Medium)
Red: 0%~30% (Low)
5. Charging
Please use the in-box Type-C cable to charge the device. The
LED indicator will flash in red while charging and stay on
green while fully charged.