Use Instructions - Vaporesso TARGET PM30 User Manual

USE INSTRUCTIONS

1. Install or replace the coil
Pull out the pod and then pull out the used coil. Install a new one firmly. Please make
sure the bottom notch of the coil is aligned with the both sides of the pod, or it may
cause leakage.
X
Correct Installation Incorrect Installation
1 2
2. Filling the E-juice
Slide the top cap to reveal the PTF slot, insert the e-liquid bottle nozzle to squeeze the
e-liquid through the slot. If it's your first time filling the e-liquid of this pod, please wait for
5 minutes for the e-liquid to soak into the coil.
2 English