Vaporesso XIRON User Manual page 6

(3) High Resistance Protection: when a high resistance is
detected, the device will stop working and show "HIGH
ATOMIZER" on the screen.
(4) No-load Protection: when there is no coil detected, the
device will stop working and "CHECK ATOMIZER" will show on
the screen.
(5) Short-circuit Protection: when a short-circuit is detected,
the device will stop working and "SHORT ATOMIZER" will show
on the screen.
(6) Low Voltage Protection: when the battery voltage is too
low to start vaping, the device can not be operated and "LOW
BATTERY" will show on the screen.
(7) Over Discharge Protection: when the battery voltage is
extremely low during vaping, the device will stop working and
"LOW BATTERY" will show on the screen.
(8) Over Charge Protection: the device will stop charging when
it is fully charged.
(9) USB Input Protection: when the USB detects an input
voltage exceeding the rated voltage, the device will stop
charging.
CAUTIONS
1. Please turn off the device when it is not in use.
2. Do not leave the charging device unattended.
3. Do not drop, throw or abuse your device, which may cause
damage.
4. Please use a standard USB output charger with proper
charging current and voltage range.
5. Keep away from the water or any flammable gas, liquid.
6. Do not expose the device to direct sunlight, dust, moisture
or mechanical shock.
7. Do not expose the device to extreme temperature.
(Recommended temperature range: -10~60 ℃ /14~140 ℉ while
4 English