Kenwood KM001 Assemble & Disassembling page 5

Spares - KM001/002/003/502/005/006/007/506 Disassembly & re-assembly instructio...
9. CAREFULLY OPERATE THE HEAD
RELEASE WHILE RESTRAINING THE
PEDESTAL. ALLOW TO FULLY OPEN
SLOWLY.
WARNING: THE PEDESTAL WILL SPRING
UP VIOLENTLY UNLESS IT IS RESTRAINED
10. REMOVE 4 SCREWS (TX20)
(NOTE - ONE REAR SCREW MAY BE CHANGED
TO TX15 ON LATER PRODUCTION)
TAKE CARE TO AVOID SCRATCHING BODY
WITH THE HEAD LIFT MECHANISM
11. REMOVE LOCATION PIN (8MM HEX
NUT)
12. LIFT QUADRANT COVER AND
DISCONNECT 3 CONNECTORS
(SENSORS, MOTOR SUPPLY, POWER SUPPLY)
13. REMOVE SPEED CONTROL MODULE
14. REMOVE QUADRANT COVER
http://www.kenwoodservice.co.uk/product-files-kar/sovereign-tech2.htm
Page 5 of 11
30/04/2009